Certificate of Analysis
Report To: FABRITE Laminating Corporation
70 Passaic Street
Woodridge, NJ 07075
Test Date: December 11, 2008 Test ID: 081211-1 thru 081211-5
Item: CPSIA Analysis of 1 mil Polyurethane Film and Polyester Interlock Fabric-
Purple with Maximum Color Saturation.
Method: The Test material was prepared and analyzed in duplicate as outlined in USP 25, ASTM Methods, AATCC Methods and according to the Standard Operating Procedures of BRC Laboratory.
Results: The samples were analyzed and the following results were concluded and in fact
conform to and meet the specifications of CPSIA:
Sample ID# 081211-1 Sample had less than the quantitative Limit of
Hydrogen Cyanide. (No Hydrogen Cyanide Present)
Sample ID# 081211-2 Sample had less than the quantitative limit for Di-
Isocyanate. (No Di-Isocyanate Present)
Sample ID# 081211-3 Sample had less than the quantitative limit for Pthalates.
(No Pthalates were present)
Sample ID# 081211-4 Sample had less than the quantitative limit for
Formaldehyde. (No Formaldehyde Present)
Sample ID# 081211-5 Sample had less than the Quantitative Limit for Lead.
(No Lead was present)
PARIS TEXTILES
Certificate of Compliance
Pursuant to Section 101 of the Consumer Product Safety Improvement Act
Product Description:
Paris Textiles fabrics and products.
Safety Regulation Citations:
Lead in Substrates – CPSIA Section 101, EPA 3051 / 3052
Importer or Domestic Manufacturer’s Information:
Paris Textiles
18627 Brookhurst Street
Suite 316
Fountain Valley, CA 92708
(714) 843-1997
Record Holder’s Information:
Solange Ohana
Paris Textiles
18627 Brookhurst Street
Suite 316
Fountain Valley, CA 92708
(714) 843-1997
Date of Manufacture:
This certification applies to products manufactured on and after January 31, 2008.
Compliance Information:
Paris Textiles is a long-standing converter of quality fabrics that meet or exceed
regulatory requirements for consumer product safety. Our products are continuously
evaluated by Paris Textiles, on the basis of test data provided by SGS Testing, to
ensure that each product complies with all rules, bans, standards, or regulations
applicable to the product under the federal Consumer Product Safety Act or any
other Act enforced by the Consumer Product Safety Commission.
TPCA (Third Party Conformity Assessment Body):
SGS Testing Korea Co., Ltd.
The O Valley 322, 555-9
Hogye-dong, Dongan-gu
431-080 Anyang
Korea
